China Leader Of Natural Stone, Quartz & Countertop
Select language



« The difference of Marble and granite use and hardnessThe seven characteristics of green environmental protection »

Maintenance and methods of stone countertops

Stone is more and more widely used, and now people in the home improvement in the use of stone more and more, including not only from the original kitchen countertops, handbasins, to the present bay windows, table tops, tables and bar countertops, everywhere stone Embellishment applications. However, stone in the durable but also need to protect, stone as our skin, maintenance is very important. Xiaobian today to say that those stone countertops maintenance techniques and methods.

1, to keep clean and clean daily

Whether it is hard texture of the granite or soft texture of the marble are not resistant to wind sand and soil particles of long-term wear and tear, daily cleaning can use dust or electrostatic mop thoroughly dust and clean the work, avoid using a lot of water to clean; Commercial space entrance is best to place the dust pad, to avoid the shoes brought sand wear stone, reduce the difficulty of daily cleaning.

2, immediately remove the pollution

Marble is a natural product, all stone has natural pores, daily pollution sources such as tea, coffee, soy sauce, edible oil, ink, fruit juice, if not promptly removed, easy to penetrate into the stone inner layer, causing deep pollution. Professional anti-fouling agents can be removed in a timely manner to prevent the stains into the stone caused by uncleanable stains.

3, select the right cleaning agent

Stone afraid of strong acid and alkali As we all know, clean stone can not be fast for the neglect of the composition of cleaning agents. General cleaning agents are containing acid-base, if the use of unknown ingredients for a long time cleaning agent, will make the stone surface gloss loss, or even produce lesions may.

4, protective treatment is very important

To keep the most beautiful stone side, barrier water and the penetration of pollution sources, we must regularly carry out protective treatment. On the stone after the construction of the protection must be able to maintain the permeability of stone and waterproof, anti-fouling. Do not use the unknown protective agent, so as not only reach the protective effect, but increased the difficulty of stone maintenance.

Natural stone need smooth air breathing, stone surface should be avoided in the long-term coverage of carpets or other debris, or moisture under the stone can not easily evaporate through the pores caused by excessive moisture, increased water content will produce disease problems. Such as the need to lay the carpet, stacking debris, please from time to time to the stone fresh air.

Of course, rely on daily dust, clean stone is not able to continue to maintain the luster does not fade, be sure to regularly ask the professional stone conservation personnel to do maintenance and gloss regeneration of maintenance work. Such as: the use of crystallization to recrystallize the marble surface, or the use of polishing powder to restore the luster of marble, or the use of permeability of the luster of the protective agent, and so on, so that the stone beautiful long-lasting as new.

Moisture is also an important factor affecting the appearance of stone, water and gas will produce stone hydration, hydrolysis and carbonation, resulting in water spots, albino, weathering, denudation, rust yellow and other lesions, so the indoor stone to keep ventilation dry.

  • Related articles:

Add a comment:

◎Welcome to participate in discussions, here, please post your views, communicate your views.

日历

Categories

Archives

Comments

Previous


Copyright (c)2016 All Rights Reserved Newstar
Email: kob@newstarstone.com kob@newstarchina.com
Tel: +86 - 595 - 2228 9926 , 2812 1069    Fax: +86 - 595 - 2228 7926 , 2216 6926